Adige LASERTUBE LT722D fiber laser machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Ludwigsburg
Germany, Ludwigsburg
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Pullach
Germany, Kaiserslautern
Germany, Lübeck
Germany, Ludwigsburg
Semi-sealed, diffusion-cooled co2 laser source rofin dc 025 compact. Rated power: 2500 w.
Main module of the automatic unloading system with 1-cnc-axis controlled support for the tube to be machined
Program-controlled unloading
Extension module of the automatic unloading system for part lengths up to 4500 mm
Sorting of good parts to front (desk side) and rear (loader side)
Sorting of cut pieces and offcuts into a cassette
Suitable for processing open profiles (flat, l, c, and u-profiles)
Specific mechanical devices and process modifications for open profiles
Suitable for processing tubes made of mild steel or stainless steel
Round tube dimensions: Ø 12–140 mm
Square tube dimensions: 12 x 12 mm to 120 x 120 mm
Rectangular/flat-oval tube dimensions: side 10 mm up to max 140 mm
Maximum side difference for rectangular/flat-oval tubes: 110 mm
Workpiece envelope: inscribed in a Ø 170 mm circle
Maximum tube weight: 15 kg/m; 100 kg total maximum
Equipment and Unloading Device FeaturesEquipment for a 6.5 m bundle loader for tubes/pipes with sensitive surfaces: Rubber cladding of the chains for material feed. Plastic cladding of the tube/pipe loading and holding parts up to separation.Main module of the automatic Unloading Device, with: 1-CNC-axis controlled support for the tube/pipe to be processed. Program-controlled unloading.Extension module of the automatic Unloading Device for partial lengths up to 4,500 mm, with: Sorting of the good parts: To the front (console side), from 250 mm to 4,500 mm. To the rear (loader side) up to 4,000 mm. Sorting of crop ends and remnants in lengths under 250 mm into a cassette.Tube/Pipe SpecificationsRound Tubes: Diameter $\text{12 mm}$ up to $\text{140 mm}$.Square Tubes: $\text{12 x 12 mm}$ up to $\text{120 x 120 mm}$.Rectangular/Flat Oval Tubes: $\text{10 mm}$ side up to max. $\text{140 mm}$ side. Maximum side difference: $\text{110 mm}$. Must be inscribable in a $\text{170 mm}$ diameter circle.Maximum Tube/Pipe Weight: $\text{15 kg/m}$ (100 kg maximal total).
Equipment for a 6.5 m bundle loader for tubes/pipes with sensitive surfaces: Rubber cladding of the chains for material feed. Plastic cladding of the tube/pipe loading and holding parts up to separation.
Main module of the automatic Unloading Device, with: 1-CNC-axis controlled support for the tube/pipe to be processed. Program-controlled unloading.
Extension module of the automatic Unloading Device for partial lengths up to 4,500 mm, with: Sorting of the good parts: To the front (console side), from 250 mm to 4,500 mm. To the rear (loader side) up to 4,000 mm. Sorting of crop ends and remnants in lengths under 250 mm into a cassette.
Round Tubes: Diameter $\text{12 mm}$ up to $\text{140 mm}$.
Square Tubes: $\text{12 x 12 mm}$ up to $\text{120 x 120 mm}$.
Rectangular/Flat Oval Tubes: $\text{10 mm}$ side up to max. $\text{140 mm}$ side. Maximum side difference: $\text{110 mm}$. Must be inscribable in a $\text{170 mm}$ diameter circle.
Maximum Tube/Pipe Weight: $\text{15 kg/m}$ (100 kg maximal total).
Additional equipment
PRECITEC AK-HP universal cutting head holder for non-contact distance control
Capacitive distance sensor with reinforced ceramic part
Pressure resistance up to 25 bar
Mixed cooling (water and dry air) for the lens holder/upper lens area
Dry-air cooling of the ceramic part and nozzle
Automatic tube bundle loader for initial lengths between 3200 and 6500 mm
Loading with an overhead crane possible
Special lift loader equipment for square, rectangular, and flat-oval tubes
Tube separation with length measuring station
Equipment for a 6500 mm bundle loader for pipes with sensitive surfaces
Artube nesting software included
application type: Cutting
Location: Germany
machine type: Fiber Laser Cutting Machine
Laser Power: 2.5 kW