Trumpf TruLaser 3030 L49 fiber 6kW + Liftmaster compact fiber laser machine
Ludwigsburg6926 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7141 48...
Show
+49 7141 4882799
+49 176 246...
Show
+49 176 24697022
Germany 
Germany, Ludwigsburg
Germany, Lübeck
Germany, Lübeck
Germany, Guenzburg
Germany, Lübeck
Germany, Pullach
Germany, Pullach
Germany, Pullach
Spain, Barcelona
Netherlands, Rotterdam
60 Hz
Finland, Finlandia
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Italy, Berlingo (BS)
Year 2019
Machine hours: about 21.000 / 14.000 h
Standard equipment
- Closed machine frame
- Integrated Cabinet with shutter
- Torque drive in combination with direct linear drives
- Chiller
- Integrated electrical cabinets with inside lightning
- Automatic pallet changer lengthwise installation
- 17“colour touch screen
- Longitudinal conveyor
- work area lightning
- Positioning laser diode
- Spray device
- PierceLine
- FocusLine
- NitroLine
- PlasmaLine
- Automatic nozzle cleaning
- Copper cutting package (consists cutting data)
- Brass cutting package (consists cutting data)
TRUMPF Laser
- Solid state laser TruDisk 3001 with 1 LLK output
- Excitation with pump diodes
- Laser power control
- Logbook function laser
Cutting head
- Universal cutting head
- One-cutting-head-strategy
- Protective glass against lense contamination
- Protective glass monitoring
- ControlLine: height regulation and sheet edge detection
Control
- Control SINUMERIK 840 D SL
- Easy shop floor programming
- Extended shop floor programming
- Fast reproduction
- Integrated technology data
- Automatic shutdown
- Programmable gas selection / pressure setting
- FastLine
- FlyLine
- Teleservice by internet
Data Transmission
- USB - interface
- RJ45 network connection
Safety
- CE label
- Lightguards
- Multi chamber exhaust system
- Compact dust extractor
- Machine enclosure with certified viewing panel, door on the right
- Electrical roll roof
Options
Advanced laser equipment
- Solid state laser TruDisk 6001 with 1 LLK output
Advanced machine equipment
- Nozzle changer
- BrightLine Fiber (only with TruDisk 6001)
- Wide crosswise conveyor with container (right)
- Cleaning brush
- Separate power supply of TruDisk
Data transfer
- MDE interface
Automation
- Liftmaster compact: base unit with synchronous loader, peeling unit and sheet thickness measuring device, movable unloading rake, incl. loading /unpacking station, max. stack height 90mm for loading, max. stack height 250mm for unloading
(right hand installation)
Additional equipement
- Separation of thin sheets (ab s=0,8mm)
- Loading station for extended stack height (max. 300mm / 3to)
- Cleaning brush for table grids
Baujahr 2019
Maschinenstunden: ca. 21.000 / 14.000 h
Maschinenausstattung
- Geschlossener Maschinenrahmen
- Integrierter Schrank mit Rolladen
- Torque-Antrieb in Kombination mit Linear-Direktantrieben
- Kühlaggregat
- Integrierte Schaltschränke mit Innenbeleuchtung
- automatischer Palettenwechsler in Längsrichtung
- 17" Touch Farbbildschirm
- Längsförderband
- Arbeitsraumbeleuchtung
- Positionslaserdiode
- Sprüheinrichtung
- PierceLine
- FocusLine
- NitroLine
- PlasmaLine
- Automatische Düsenreinigung
- Kupfer-Schneidpaket
- Messing-Schneidpaket
TRUMPF Laser
- Festkörperlaser TruDisk 3001 mit 1 LLK-Abgang
- Anregung über Pumpdioden
- Laserleistungssteuerung
- Logbuchfunktion Laser
Schneidkopf
- Universal-Schneideinheit
- Einschneidkopf-Strategie
- Schutzglas gegen Linsenverschmutzung
- Zustandsprüfung des Schutzglases
- ControlLine: Höhenregelung und Blechaußenkantenerfassung
Steuerung
- Steuerung SINUMERIK 840 D SL
- Einfache Werkstattprogrammierung
- Erweiterte Werkstattprogrammierung
- Schnelles Nachproduzieren
- Integrierte Technologiedaten
- Abschaltautomatik
- Programmierbare Schneidgas-/druckanwahl
- FastLine
- FlyLine
- MicroWeld
- Teleservice per Internet
Datenübertragung
- USB-Schnittstelle
- RJ-45 Netzwerkanschluss
Sicherheit
- CE-Kennzeichnung
- Lichtschranken
- Mehrkammerabsaugung
- Kompaktentstaubungsanlage
- Maschinenverkleidung, zertifizierten Sichtscheibe, Tür rechts
- Elektrisches Rolldach
Zusatzausstattung
Erweiterte Laserausstattung
- Festkörperlaser TruDisk 6001 mit 1 LLK-Abgang
Erweiterte Maschinenausstattung
- Düsenwechsler
- BrightLine Fiber (nur in Verbindung mit TruDisk 6001)
- Breites Querförderband mit Kippbehälter (rechts)
- Reinigungsbürste
- Separate Energieversorgung des TruDisk
Datenübertragung
- MDE-Schnittstelle
Automatisierung
- Liftmaster Compact: Grundeinheit mit Synchronlader, Abschäleinrichtung und Blechdickenmessgerät, verschiebbarer Entnahmerechen, inkl. Rohmaterial-/Auspackstation, max. Stapelhöhe auf Beladeseite 90mm, max. Stapelhöhe auf Entladeseite 250mm
(Rechtsaufstellung)
Erweiterte Ausstattung
- Vereinzeln von Dünnblechen (ab s=0,8mm)
- Beladestation für erweiterte Stapelhöhe (bis 300mm / 3to)
- Reinigungsbürste für Auflageleisten