Eos M290 Pro Package 3D printer
Jaroměř
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 173 66...
Show
+49 173 6621456
+49 211 635...
Show
+49 211 63550780
Czechia 
Germany, Dusseldorf
Germany, Dusseldorf
Germany, Dietzenbach
Germany, Pirna
Germany, Dusseldorf
Germany, Saalfeld/Saale
Germany, Dusseldorf
Germany, Dusseldorf
Switzerland, Männedorf
Lithuania, Kaunas
Germany, Dusseldorf
Germany, Fulda
Germany, Dusseldorf
Germany, Dusseldorf
Technische Daten & Highlights:
- Modell: EOSINT M 290 / 400W
- Betriebsmodi: Dual Mode – Betrieb mit Argon und Stickstoff
- Installationsjahr: 2018
- Betriebsstunden: ca. 400 Stunden – sehr geringe Nutzung, da der Einsatz der Additiven Fertigung im Unternehmen nicht vorangebracht wurde
- Materialsets:
- Maraging Steel MS1
- CX (Corrrax)
- AlSi10Mg
- Offene Parameter (Editor)
Zubehör & Ausstattung:
- 1 × IPCM M Extra Line – Förder- und Siebstation für effiziente Pulverhandhabung
- 2 × 10-Liter Edelstahl-Container inkl. Konen
- 2 × Hubwagen / Lifting Trolleys
- 1 × Industriestaubsauger RUWAC
Vorteile:
- Bewährtes System für die additive Metallfertigung
- Sehr geringe Maschinenstunden → praktisch neuwertig
- Dual-Gasbetrieb (Argon / Stickstoff) für flexible Materialnutzung
- Umfangreiches Zubehörpaket für sofortigen Produktionseinsatz
Technische Spezifikationen:
- Bauvolumen: 250 × 250 × 325 mm (9.8 × 9.8 × 12.8 in)
- Lasertyp: Yb-Faserlaser, 1 × 400 W
- Präzisionsoptik: 1 F-Theta-Linse, 1 High-Speed-Scanner
- Scangeschwindigkeit: bis zu 7,0 m/s (23,0 ft/s)
- Fokusdurchmesser: ca. 100 µm (0.00394 in)
- Stromversorgung: 1 × 32 A
- Leistungsaufnahme: max. 8,5 kW / typisch 2,4 kW
- Druckluftversorgung: 7 bar; 20 m³/h (102 psi; 706 ft³/h)
Installationsjahr: 2018
Praezisionsoptik: 1 F-Theta-Linse, 1 High-Speed-Scanner
Bauvolumen: 250 × 250 × 325*mm * Bauhöhe = Gesamthöhe minus der Höhe der Bauplattform (zwischen 35 mm und 40 mm)
Lasertyp: Yb-Faserlaser, 1 × 400 W
Scangeschwindigkeit: bis zu 7,0 m/s (23,0 ft/s)
Fokusdurchmesser: ca. 100 µm (0.00394 in)
Stromversorgung: 1 × 32 A
Leistungsaufnahme: max. 8,5 kW / typisch 2,4 kW
Druckluftversorgung: 7 bar; 20 m³/h (102 psi; 706 ft³/h)