BAYKAL APHS 31.300 press brake
Ahaus6623 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 2561 9...
Show
+49 2561 938471
+49 2561 9...
Show
+49 2561 938436
Germany 
Germany, Ahaus
Germany, Guenzburg
Germany, Niederlangen
Germany, Location:dresden
Germany, Viersen
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
chamfer lenght 3100 mm
distance between columns 2550 mm
column arm 500 mm
ram stroke speed 110 mm/sec
return speed 100 mm/sec
work speed 8,0 mm/sec
work stroke 420 mm
dayligth 870 mm
table height 905 mm
oil volume 280 ltr.
voltage 400 Volt
working pressure 283 bar
Number of working hours ~ 21.835 h
total power requirement 23,0 kW
weight 18.250 kg
Dimensions (HxWxD) 4550 x 2250 x 3300 mm
** current new price ~ 135.000 euros
--------------------------------------------------
Press brake with special equipment
* increased installation height
* increased cylinder stroke
* as well as increased bending beam speeds
--------------------------------------------------
Furnishing:
- DELEM CNC control model DA 66T (touch screen)
* 2D graphic touch screen programming mode
* 17" high-resolution color TFT
* Complete Windows application suite
* Delem Modusys compatibility (module scalability and adaptivity)
* USB, peripheral port
* Pivoting control unit, front left
- Motorized backgauge with R-axis, on ball screws
- X = 800 mm R = 250 mm with 2 stop fingers
- CNC controlled axes : Y1 - Y2 - X - R - Z1 + Z2 - C (crowning) + AP1
- 2x CNC electrically movable stop fingers
- Electric crowning controlled by CNC
- Safety device behind the machine
- FIESSLER AKAS laser protection device in front of the machine
- 2x front support arms "Sliding-System", with T-slot and cam
- 1x free-moving double foot control
- CE mark / declaration of conformity
- Control cabinet, on the left side
- Operation manual
** Special accessories included :
- WILA hydraulic tool clamping above
- WILA hydraulic tool clamping below
- 1x CNC controlled bending aid (AP1)
- "Parking" area for bending assistance
* Machinevideo :
show contacts
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Arbeitsgeschwindigkeit 8,0 mm/sec
Arbeitshub 420 mm
Betriebsspannung 400 Volt
Arbeitsdruck 283 bar
Betriebsstunden ~ 21.835 h
Gesamtleistungsbedarf 23,0 kW
Gewicht 18.250 kg
Abmessung HxBxT 4550 x 2250 x 3300 mm