Gebr. STAR ST-38 Bj metal lathe
Geislingen6935 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 1516 15...
Show
+49 1516 1553657
+49 7428 91...
Show
+49 7428 9188869
Germany 
€7,900
≈ TZS 23,230,000
≈ $9,265
Germany, Weilheim Teck
Germany, Location:frankfurt
€17,900
≈ TZS 52,630,000
≈ $20,990
Germany, Weilheim Teck
Germany, Karlsbad
Germany, Karlsbad
Germany, Wiesbaden
Germany, Karlsbad
Germany, Karlsbad
Germany, Karlsbad
Germany, Karlsbad
Germany, Karlsbad
Germany, Wiesbaden
Germany, Karlsbad
erstklassiger Zustand, nur ca. 9000 Betriebsstunden
Fanuc, Hochleistungs-CNC-Steuerung Serie 31i-B5,
3-Kanal-Steuerung,
3 Revolver,
12 CNC-Achsen, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3),
Eilganggeschwindigkeit 30 mm/min,
Stangendurchmesser max. 38 mm,
Drehlänge max. 350 mm,
Hauptspindel, Drehzahl max. 7.000 U/min, C-Achse 0,001 Grad,
Hauptspindel Antriebsleistung 11 kW
Gegenspindel Drehzahl max. 7.000 U/min, C-Achse 0,001 Grad,
Gegenspindel Antriebsleistung 7,5 kW
Revolver Drehzahl max. 5.700 U/min, (mit entsprechendem Werkzeughalter auch höher)
Revolver Antriebsleistung 4 kW
Werkzeughalterhalterstationen für insgesamt 30 (10 pro Revolver)
(vorbereitet für innengekühlte Werkzeuge)
Werkzeughaltersatz, (nicht angetriebene)
Führungsbuchseneinheit (Zug-System, JBS)
Ölkühlereinheit
Hochdruckförderer (mit integrierter Hochdruckeinheit) Typ Müller combistream CS 3
Kühlmitteleinsatz: Öl
Gewicht: 6,25 to
Abmaße: (LxBxH) 3477x1860x1865 mm
Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden.
Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!
Technical data:
first-class condition, only approx. 9000 operating hours
Fanuc, high performance CNC control series 31i-B5,
3-channel-control,
3 turrets,
12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3),
rapid traverse speed 30 mm/min,
bar diameter max. 38 mm,
turning length max. 350 mm,
main spindle, speed max. 7,000 rpm, C-axis 0.001 deg,
main spindle drive power 11 kW
Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg,
counter spindle drive power 7.5 kW
Turret speed max. 5,700 rpm, (with appropriate tool holder also higher)
turret drive power 4 kW
Tool holder stations for a total of 30 (10 per turret)
(prepared for internally cooled tools)
Tool holder set, (non-driven)
Guide bushing unit (tension system, JBS)
Oil cooler unit
High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3
coolant application: oil
Weight: 6,25 to
Dimensions: (LxWxH) 3477x1860x1865 mm
The machine can be inspected under power by appointment.
Changes and errors in the technical data and information and subject to prior sale!