Heyligenstaedt Heynumat 24 LK-2/5000 machining centre
Pullach
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Germany, Munich
Germany, Pullach
Germany, Location:würzburg
Germany, Location:stuttgart
Germany, Pullach
Germany, Pullach
Germany, Location:hamburg
Germany, Location:dortmund
Germany, Pullach
Germany, Location:hamburg
Germany, Pullach
Germany, Location:stuttgart
Germany, Pullach
Germany, Location:frankfurt
Germany, Pullach
Germany, Pullach
Germany, Stuttgart
Germany, Pullach
Germany, Pullach
Germany, Location:düsseldorf
Manufacturer
Heyligenstaedt
Model
Heynumat 24 LK-2/5000
Year of Manufacture
2012
Machine Type
Lathe
Siemens Sinumerik 840D SL
Control Type
Contouring control
Number of Axes
6
Condition
Used
Centre Distance (Nominal Length)
5000 mm
Spindle Flange to Tailstock Quill
5413 mm
Swing Diameter Over Bed
890 mm
Swing Diameter Over Cross Slide
760 mm
Max. Tool Swing Radius
840 mm
X-Axis Travel Left (TWS Left)
+516 / +86 mm
X-Axis Travel Right (TWS Right)
+530 / -10 mm
Spindle
Spindle Head: DIN 55026 Form A
Size 15
Spindle Diameter at Front Bearing: 240 mm
Spindle Bore (through): 122 mm (draw tube diameter 128 mm x 350 mm)
Speed Range (2-stage gearbox): 4 to 1120 rpm
Speed Range Stage I: 4 to 248 rpm
Speed Range Stage II: 18 to 1120 rpm
Max. Torque at Spindle (S1 100%): 11,500 Nm
Chuck: SMW KNCS-N 500/155
C-Axis
Drive: Via main spindle drive with disc brake
Max. Holding Torque at Work Spindle: 2,300 Nm
Work Spindle Speed in C-Axis Mode: 0.1 to 60 rpm
Positioning Accuracy: 0.008 degrees
Drive and Feed
Main Drive Power: 100 kW
Supply Voltage: 400 V / 50 Hz
Total Electrical Connection (minimum): 150 kVA
Feed Force X/Z-Axis: 14,000 / 22,000 N
Feed Speed Range: 0.5 to 5000 mm/min
Rapid Traverse: up to 15 m/min
Linear Measuring System: Heidenhain with air purge on X and Z axes
Dual Tool Carrier System (TWS)
Tool Carrier Type: Drum tool magazine (TWS) - Left and Right
Tool Positions per Carrier: 12 (left) + 12 (right)
Tool Interface Right (TWS): DIN 69880
axial
Tool Interface Left (TWS): DIN 69880
radial
Live Tooling: Yes (both carriers)
Max. Setting Dimension Q: 155 mm
Boring Bar Holder: included
Tailstock
Quill Diameter: 160 mm
Quill Stroke: 150 mm
Internal Taper: Morse Taper 6 (MK 6)
Tailstock End Position: 5413 mm
Axial Force (continuously variable): 4,000 to 25,000 N
Tailstock base travels via drag coupling
Steady Rest
Manufacturer: SMW (special design)
Centering Range: 150 to 500 mm
Steady base travels via NC axis
Machine Weight and Noise
Total Machine Weight: approx. 30,000 kg
Sound Pressure Level at Max. Idle Speed: 78 dB(A) (per DIN 45635 / Part 1601)
Included Accessories
Chip conveyor
SMW steady rest (centering range 150 to 500 mm)
Hard and soft chuck jaws
various sizes
Boring bar holder and adapter for 120 mm diameter boring bars
Various tool holders
Two telescopic covers (require revision)
Complete machine and control documentation in manuals
Find more here
show contacts
Contact us at
show contacts