Morbidelli A 600 K machining centre for sale by auction
Sat Lăzăreni
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€ 6000
≈ $ 7010
Romania, Galați
€ 10000
≈ $ 11680
Romania, Com. Crivat, Calarasi
X-axis: 3,000 mm
Y-axis: 1,360 mm
Z-axis: 180 mm
Maximum Panel Thickness: 180 mm
Spindle:
Type: Electrospindle
Power: 10 HP (approx. 7.5 kW)
Tool Holder: ISO 30
Tool Change Positions: 10
Drilling Units:
Vertical Drilling Spindles: 10 independent
Horizontal Drilling Spindles:
X-axis: 2 (opposing)
Y-axis: 2
Sawing Unit:
Blade Rotation: 0° to 90°
Vacuum Pump Capacity: 100 m³/h
Power Requirements:
Operating Voltage: 380 V AC, 50 Hz
Total Power Consumption: Approximately 20 kW
Dimensions & Weight:
Installation Footprint: Approximately 4 x 7 meters (excluding control unit)
Transport Dimensions: 5400 x 2380 x 2449 mm
Weight: Approximately 3,500 kg
Important: All dimensions and data presented are approximated; the machine is already dismantled
Working Area: X-axis: 3,000 mm Y-axis: 1,360 mm Z-axis: 180 mm Maximum Panel Thickness: 180 mm Spindle: Type: Electrospindle Power: 10 HP (approx. 7.5 kW) Tool Holder: ISO 30 Tool Change Positions: 10 Drilling Units: Vertical Drilling Spindles: 10 independent Horizontal Drilling Spindles: X-axis: 2 (opposing) Y-axis: 2 Sawing Unit: Blade Rotation: 0° to 90° Vacuum Pump Capacity: 100 m³/h Power Requirements: Operating Voltage: 380 V AC, 50 Hz Total Power Consumption: Approximately 20 kW Dimensions & Weight: Installation Footprint: Approximately 4 x 7 meters (excluding control unit) Transport Dimensions: 5400 x 2380 x 2449 mm Weight: Approximately 3,500 kg Important: All dimensions and data presented are approximated
the machine is already dismantled
X-Achse: 3.000 mm
Y-Achse: 1.360 mm
Z-Achse: 180 mm
Maximale Plattendicke: 180 mm
Spindel:
Typ: Elektrospindel
Leistung: 10 PS (ca. 7,5 kW)
Werkzeugaufnahme: ISO 30
Werkzeugwechselpositionen: 10
Bohreinheiten:
Vertikale Bohrspindeln: 10 unabhängige Bohrspindeln
Horizontale Bohrspindeln:
X-Achse: 2 (gegenüberliegend)
Y-Achse: 2
Sägeeinheit:
Klingendrehung: 0° bis 90°
Kapazität der Vakuumpumpe: 100 m³/h
Leistungsanforderungen:
Betriebsspannung: 380 V AC, 50 Hz
Gesamtleistungsaufnahme: ca. 20 kW
Abmessungen und Gewicht:
Grundfläche der Installation: ca. 4 x 7 Meter (ohne Steuereinheit)
Abmessungen des Transports: 5400 x 2380 x 2449 mm
Gewicht: ca. 3.500 kg
Wichtig: Alle dargestellten Abmessungen und Daten sind ungefähre Angaben; Die Maschine ist bereits demontiert
Eje X: 3.000 mm
Eje Y: 1.360 mm
Eje Z: 180 mm
Espesor máximo del panel: 180 mm
Huso:
Tipo: Electromandril
Potencia: 10 CV (aprox. 7,5 kW)
Portaherramientas: ISO 30
Posiciones de cambio de herramienta: 10
Unidades de perforación:
Husillos de perforación vertical: 10 independientes
Husillos de perforación horizontal:
Eje X: 2 (opuesto)
Eje Y: 2
Unidad de aserrado:
Rotación de la hoja: 0° a 90°
Capacidad de la bomba de vacío: 100 m³/h
Requisitos de energía:
Voltaje de funcionamiento: 380 V CA, 50 Hz
Consumo total de energía: aproximadamente 20 kW
Dimensiones y peso:
Huella de instalación: Aproximadamente 4 x 7 metros (excluyendo la unidad de control)
Dimensiones de transporte: 5400 x 2380 x 2449 mm
Peso: Aproximadamente 3.500 kg
Importante: Todas las dimensiones y datos presentados son aproximados; La máquina ya está desmontada
X-akseli: 3 000 mm
Y-akseli: 1 360 mm
Z-akseli: 180 mm
Paneelin enimmäispaksuus: 180 mm
Kara:
Tyyppi: Sähkökara
Teho: 10 hv (noin 7,5 kW)
Työkalun pidin: ISO 30
Työkalun vaihtoasennot: 10
Porausyksiköt:
Pystysuorat porauskarat: 10 itsenäistä
Vaakasuorat porauskarat:
X-akseli: 2 (vastakkainen)
Y-akseli: 2
Sahausyksikkö:
Terän kierto: 0° - 90°
Tyhjiöpumpun kapasiteetti: 100 m³/h
Tehovaatimukset:
Käyttöjännite: 380 V AC, 50 Hz
Kokonaisvirrankulutus: noin 20 kW
Mitat ja paino:
Asennuksen jalanjälki: Noin 4 x 7 metriä (ilman ohjausyksikköä)
Kuljetusmitat: 5400 x 2380 x 2449 mm
Paino: Noin 3 500 kg
Tärkeää: Kaikki esitetyt mitat ja tiedot ovat likimääräisiä; kone on jo purettu
Axe X : 3 000 mm
Axe Y : 1 360 mm
Axe Z : 180 mm
Épaisseur maximale du panneau : 180 mm
Fuseau:
Type : Électrobroche
Puissance : 10 CV (env. 7,5 kW)
Porte-outil : ISO 30
Positions de changement d’outil : 10
Unités de forage :
Broches de perçage verticales : 10 indépendantes
Broches de perçage horizontales :
Axe X : 2 (opposé)
Axe Y : 2
Unité de sciage :
Rotation de la lame : 0° à 90°
Capacité de la pompe à vide : 100 m³/h
Exigences d’alimentation :
Tension de fonctionnement : 380 V AC, 50 Hz
Consommation électrique totale : environ 20 kW
Dimensions et poids :
Encombrement de l’installation : environ 4 x 7 mètres (sans l’unité de contrôle)
Dimensions de transport : 5400 x 2380 x 2449 mm
Poids : environ 3 500 kg
Important : Toutes les dimensions et données présentées sont approximatives ; La machine est déjà démontée
Asse X: 3.000 mm
Asse Y: 1.360 mm
Asse Z: 180 mm
Spessore massimo del pannello: 180 mm
Fuso:
Tipologia: Elettromandrino
Potenza: 10 CV (circa 7,5 kW)
Portautensili: ISO 30
Posizioni di cambio utensile: 10
Unità di perforazione:
Mandrini di foratura verticali: 10 indipendenti
Mandrini di foratura orizzontali:
Asse X: 2 (opposto)
Asse Y: 2
Unità di segatura:
Rotazione della lama: da 0° a 90°
Capacità della pompa del vuoto: 100 m³/h
Requisiti di alimentazione:
Tensione di esercizio: 380 V CA, 50 Hz
Potenza assorbita totale: circa 20 kW
Dimensioni e peso:
Ingombro di installazione: circa 4 x 7 metri (esclusa l'unità di controllo)
Dimensioni di trasporto: 5400 x 2380 x 2449 mm
Peso: circa 3.500 kg
Importante: tutte le dimensioni e i dati presentati sono approssimativi; la macchina è già smontata
X-as: 3.000 mm
Y-as: 1.360 mm
Z-as: 180 mm
Maximale paneeldikte: 180 mm
Spoel:
Type: Elektrospindel
Vermogen: 10 PK (ca. 7,5 kW)
Gereedschapshouder: ISO 30
Posities gereedschapswissel: 10
Booreenheden:
Verticale boorspindels: 10 onafhankelijk
Horizontale boorspindels:
X-as: 2 (tegengesteld)
Y-as: 2
Zaageenheid:
Rotatie blad: 0° tot 90°
Capaciteit vacuümpomp: 100 m³/h
Stroomvoorziening:
Bedrijfsspanning: 380 V AC, 50 Hz
Totaal stroomverbruik: ongeveer 20 kW
Afmetingen & Gewicht:
Voetafdruk installatie: Ongeveer 4 x 7 meter (exclusief besturingseenheid)
Afmetingen transport: 5400 x 2380 x 2449 mm
Gewicht: Ongeveer 3.500 kg
Belangrijk: Alle gepresenteerde dimensies en gegevens zijn bij benadering; De machine is al gedemonteerd
Oś X: 3 000 mm
Oś Y: 1 360 mm
Oś Z: 180 mm
Maksymalna grubość panelu: 180 mm
Wrzeciono:
typu: Elektrowrzeciono
Moc: 10 KM (ok. 7,5 kW)
Uchwyt narzędziowy: ISO 30
Pozycje wymiany narzędzi: 10
Jednostki wiertnicze:
Pionowe wrzeciona wiertarskie: 10 niezależnych
Wrzeciona wiertarskie poziome:
Oś X: 2 (przeciwstawna)
Oś Y: 2
Jednostka piły:
Obrót ostrza: od 0° do 90°
Wydajność pompy próżniowej: 100 m³/h
Wymagania dotyczące zasilania:
Napięcie robocze: 380 V AC, 50 Hz
Całkowity pobór mocy: około 20 kW
Wymiary i waga:
Powierzchnia instalacji: około 4 x 7 metrów (bez jednostki sterującej)
Wymiary transportowe: 5400 x 2380 x 2449 mm
Waga: około 3 500 kg
Ważne: Wszystkie przedstawione wymiary i dane są przybliżone; maszyna jest już zdemontowana
Axa X: 3.000 mm
Axa Y: 1.360 mm
Axa Z: 180 mm
Grosimea maximă a panoului: 180 mm
Fus:
Tip: Electrospindle
Putere: 10 CP (aprox. 7,5 kW)
Suport scule: ISO 30
Poziții de schimbare a sculei: 10
Unități de foraj:
Axe de găurire verticale: 10 independente
Axe de găurire orizontale:
Axa X: 2 (opusă)
Axa Y: 2
Unitate de tăiere:
Rotația lamei: 0 ° până la 90 °
Capacitate pompă de vid: 100 m³/h
Cerințe de alimentare:
Tensiune de funcționare: 380 V AC, 50 Hz
Consum total de energie: aproximativ 20 kW
Dimensiuni și greutate:
Amprenta de instalare: aproximativ 4 x 7 metri (excluzând unitatea de control)
Dimensiuni de transport: 5400 x 2380 x 2449 mm
Greutate: Aproximativ 3.500 kg
Important: Toate dimensiunile și datele prezentate sunt aproximate; mașina este deja demontată
X-axel: 3 000 mm
Y-axel: 1 360 mm
Z-axel: 180 mm
Maximal paneltjocklek: 180 mm
Spindel:
Typ: Elektrospindel
Effekt: 10 hk (ca 7,5 kW)
Verktygshållare: ISO 30
Positioner för verktygsbyte: 10
Borr enheter:
Vertikala borrspindlar: 10 oberoende
Horisontella borrspindlar:
X-axeln: 2 (motsatt)
Y-axel: 2
Sågaggregat:
Bladrotation: 0° till 90°
Vakuumpumpens kapacitet: 100 m³/h
Krav på strömförsörjning:
Driftspänning: 380 V AC, 50 Hz
Total strömförbrukning: cirka 20 kW
Dimensioner& Vikt:
Installationsfotavtryck: Cirka 4 x 7 meter (exklusive styrenhet)
Transportmått: 5400 x 2380 x 2449 mm
Vikt: Cirka 3 500 kg
Viktigt: Alla dimensioner och data som presenteras är ungefärliga. Maskinen är redan demonterad