Verified seller 
Nagel Honmaschinen HHM 110 A sheet metal deburring machine for sale by auction
≈ US$93.45
Seevetal
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€1,500
≈ TSh 4,318,000
≈ US$1,752
Germany, Backnang
€250
≈ TSh 719,700
≈ US$292
Germany, Ochtrup
€1,000
≈ TSh 2,879,000
≈ US$1,168
Germany, Mittenaar
€800
≈ TSh 2,303,000
≈ US$934.50
Germany, Mittenaar
€3,500
≈ TSh 10,080,000
≈ US$4,088
Germany, Sprockhövel
€90
≈ TSh 259,100
≈ US$105.10
Germany, Fridolfing
€90
≈ TSh 259,100
≈ US$105.10
Germany, Schwäbisch Gmünd
€1,000
≈ TSh 2,879,000
≈ US$1,168
Germany, Ochtrup
€450
≈ TSh 1,295,000
≈ US$525.60
Germany, Backnang
€600
≈ TSh 1,727,000
≈ US$700.90
Germany, Sonneberg
€100
≈ TSh 287,900
≈ US$116.80
Germany, Hamburg
€100
≈ TSh 287,900
≈ US$116.80
Germany, Hallenberg
€100
≈ TSh 287,900
≈ US$116.80
Germany, Hamburg
€100
≈ TSh 287,900
≈ US$116.80
Germany, Hamburg
€100
≈ TSh 287,900
≈ US$116.80
Germany, Schrobenhausen
€100
≈ TSh 287,900
≈ US$116.80
Germany, Schrobenhausen
€100
≈ TSh 287,900
≈ US$116.80
Germany, Schrobenhausen
€100
≈ TSh 287,900
≈ US$116.80
Germany, Ochtrup
€100
≈ TSh 287,900
≈ US$116.80
Germany, Sonneberg
€100
≈ TSh 287,900
≈ US$116.80
Germany, Hamburg
Type: HHM 110 A, No. 2062
Operating voltage: 380 V, three-phase current, 50 Hz
Control current: 220 V
Rated current: 4 A
Application: Honing machine for fine machining of cylinder bores
Condition: used, function not tested
Pick-up / dismantling by buyer
Typ: HHM 110 A, Nr. 2062
Betriebsspannung: 380 V, Drehstrom, 50 Hz
Steuerstrom: 220 V
Nennstrom: 4 A
Anwendung: Honmaschine zur Feinbearbeitung von Zylinderbohrungen
Zustand: gebraucht, Funktion nicht geprüft
Abholung / Demontage durch Käufer
Marke: Nagel-Honmaschinen
Type : HHM 110 A, n° 2062
Tension de fonctionnement : 380 V, courant triphasé, 50 Hz
Courant de commande : 220 V
Courant nominal : 4 A
Application : Machine de rodage pour l’usinage fin des alésages de cylindres
État : utilisé, fonction non testée
Enlèvement / démontage par l’acheteur
Tipo: HHM 110 A, n. 2062
Tensione di esercizio: 380 V, corrente trifase, 50 Hz
Corrente di controllo: 220 V
Corrente nominale: 4 A
Applicazione: Levigatrice per la lavorazione di precisione di alesamenti di cilindri
Condizione: usato, funzione non testata
Ritiro / smontaggio da parte dell'acquirente
Type: HHM 110 A, nr. 2062
Bedrijfsspanning: 380 V, driefasige stroom, 50 Hz
Stuurstroom: 220 V
Nominale stroom: 4 A
Toepassing: Hoonmachine voor fijne bewerking van cilinderboringen
Staat: gebruikt, functie niet getest
Ophaling / demontage door koper