Verified seller 
VEB PKXA 100 x 4000 press brake for sale by auction
≈ US$1,164
Lichtenau Ot Ottendorf
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€940
≈ TSh 2,738,000
≈ US$1,094
Germany, Offenbach am Main
€800
≈ TSh 2,331,000
≈ US$931.40
Germany, Huisheim
€800
≈ TSh 2,331,000
≈ US$931.40
Germany, Huisheim
€100
≈ TSh 291,300
≈ US$116.40
Germany, Bad Heilbrunn
€550
≈ TSh 1,602,000
≈ US$640.30
Germany, Euskirchen
€370
≈ TSh 1,078,000
≈ US$430.80
Germany, Huisheim
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Euskirchen
€1,100
≈ TSh 3,204,000
≈ US$1,281
Germany, Reichertshofen
€1,100
≈ TSh 3,204,000
≈ US$1,281
Germany, Crailsheim
€960
≈ TSh 2,797,000
≈ US$1,118
Germany, Bad Heilbrunn
€1,000
≈ TSh 2,913,000
≈ US$1,164
Germany, Offenbach am Main
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Schierling
€1,100
≈ TSh 3,204,000
≈ US$1,281
Germany, Bad Saulgau
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Schierling
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Schierling
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Schierling
€1,100
≈ TSh 3,204,000
≈ US$1,281
Germany, Alveslohe
€1,000
≈ TSh 2,913,000
≈ US$1,164
Germany, Huisheim
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Schierling
€950
≈ TSh 2,768,000
≈ US$1,106
Germany, Schierling
<br>
Manufacturer: VEB Blechbearbeitungsmaschinenwerk Gera (GDR)<br>
Machine abbreviation / type: PKXA 100 × 4000<br>
Type: Crank press with flywheel and mechanical crank drive<br>
Robust, heavy-duty cast steel and welded construction for high rigidity<br>
Designed for long bending work over a working length of approx. 4,000 mm<br>
Maximum pressing force: approx. 100 kN<br>
<br>
- Mechanical drive via electric motor with power transmission to flywheel and crank mechanism<br>
- Uniform force transmission over the entire bending length<br>
- Upper beam with precise guidance for parallel stroke<br>
- Stroke of the top beam: approx. 80 mm<br>
- Adjustability of the upper beam: approx. 100 mm<br>
- Stroke rate: up to approx. 30 strokes per minute<br>
- Holder for standard bending tools (punches and dies)<br>
- Stable work table with tool holder in the lower beam<br>
- Electrical equipment for 3-phase operation (380 V / 50 Hz)<br>
- Main drive motor: approx. 10 kW<br>
<br>
Additional motor for height adjustment of the upper beam<br>
Mechanical control with operating and switching elements on the machine stand<br>
High stability due to total weight of approx. 10.5 t<br>
<br>
Suitable for bending steel sheets with different material thicknesses<br>
Typical areas of application: steel construction, metal construction, mechanical engineering, series production<br>
Characteristic of durable, low-maintenance design and continuous operation