New Fu Promise Air Fu-DS101 mobile compressor
≈ €6,452
Tianjin
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 198 220...
Show
+86 198 2201 0416
China 
China, Tianjin
China
China
China
China
China
TSh 20,580,000
DKK 51,000
≈ €6,822
Denmark, Midtjylland
Germany, Langenfeld (Rheinland)
Kenya, Icd Gate 5 Near Mombasa Road
India, Mustil No 7 Kila No 9/1 Baliawaas , Gurgaon - Faridabad Road Haryana India
India, Mustil No 7 Kila No 9/1 Baliawaas , Gurgaon - Faridabad Road Haryana India
United Arab Emirates, Jabel Ali Free Zone
Chile, Address: Santiago City: General Pacheco State: Buenos Aires Province
India, Sohna - Gurgaon Rd Gurugram, Haryana, 122001
India, Mustil No 7 Kila No 9/1 Baliawaas , Gurgaon - Faridabad Road Haryana India
Uruguay, Montevideo
低扭强劲：在 1350rpm 即可爆发 350N・m 峰值扭矩，完全匹配空压机高负载启动和持续供气的工况，避免频繁掉压。
稳定持续输出：2200rpm 的额定转速设计，让发动机长期运行在高效经济区间，减少高转速磨损，延长大修周期。
2. 皮实耐用，专为工地复杂工况打造
高强度铸铁缸体：整体式缸体 + 锻钢曲轴 / 凸轮轴，抗冲击、抗震动能力强，完全适配移动式空压机的野外颠簸运输和重载运行。
低故障率设计：集成式水泵、机油泵壳体，减少了渗漏点，故障率比同级别发动机降低约 40%，降低工地维修风险。
3. 省油 + 易启动，工地运维成本更低
电控共轨技术：精准控制喷油，燃油效率大幅提升，相比同功率竞品发动机，油耗可降低约 10%-15%，长期使用更省钱。
低温启动无忧：标配进气预热装置和大功率启动机，通过了 - 36℃极限低温验证，在北方冬季工地也能一次启动成功。
4. 合规性强，适配全球市场
满足国 Ⅲ/Stage ⅢA 排放标准，无需复杂后处理系统，可轻松出口到俄罗斯、中亚、东南亚等主流市场，报关、认证更省心。
三、在富诺尔 Fu-DS101 上的价值体现
供气稳定可靠：强劲低扭保障空压机在 0.7-1.3MPa 的压力区间内，输出压力无波动，适配喷砂、钻井、破拆等高压工况。
移动作业适配性强：发动机的抗震动、抗冲击设计，让设备在崎岖路面运输时，无需额外加固防护，减少运输损耗。
全周期成本可控：低油耗 + 低故障率 + 康明斯全球联保，让客户在设备使用全周期内，燃油成本和维修成本显著降低，提升设备竞争力。
四、适用场景与客户群体
工地移动作业：矿山、基建、桥梁、隧道施工的高压气源需求
出口市场：适配俄罗斯、中东、东南亚等对国三排放无强制要求的地区
高负载工况：需要长时间连续运行、启停频繁的喷砂、钻井、破碎等场景